Artwork, Safety, Bleeds & Cutting
Cut Zone (Trim Marks) The product will be cut on the trim mark, however the cut may shift up to 2mm of an inch in any direction.
Bleed Area (4mm Full Bleed)
If you wish to have colored backgrounds or images extend to the edge of the product they must past the trim marks to the full bleed margin. If they do not extend to the full bleed margin you most will end up with white strips along the edge of the product due to cutting.
The text or elements you want not to be trimmed o must be placed within the safe area. If they are placed next to the trim mark and the cutting is o but within tolerance, the text will be cut off.
||A3 | A4
||426x302mm | 214x302mm
||Hot Lamination with round corner edge
Bleeding 4 Sides, 3mm per side.
FileSize : 30 MB or Less
FileFormat : PDF,PSD,JPG