Name Card Artwork, Safety, Bleeds & Cutting
Cut Zone (Trim Marks) The product will be cut on the trim mark, however the cut maybe shift up to 1-2mm in any direction.
Bleed Area (4mm Full Bleed)
If you wish to have colored backgrounds or images extend to the edge of the product they must past the trim marks to the full bleed margin. If they do not extend to the full bleed margin you most will end up with white strips along the edge of the product due to cutting.
The text or elements you want not to be trimmed o must be placed within the safe area. If they are placed next to the trim mark and the cutting is o but within tolerance, the text will be cut off.
||89mm x 54mm
||93mm x 58mm
||– Matt Lamination
– Gloss Lamination
– Round Corner
Bleeding 4 Sides, 2mm per side.
FileSize : 50 MB or Less
FileFormat : PDF,PSD,JPG
||Semi Glossy Paper
|Marble White Card
||Shinny, smooth & combinations of pigmented coating to create the shimmering surfaces and effects
|Toile M Card
||Linen textured paper
|Ice Board Silk Card
||Dot textured paper
|Zeta Hammer Card
||Brilliant White textured paper
|Pearl Embossed (Linen) Card
||Shinny with Linen textured paper